CADDIT CAD CAM CNC Software - download AutoCAD compatible design software progeCAD Alibre T-FLEX and more
CADDIT Website Knowledge Base Search:
CL

progeCAD Help

CR
Welcome to progeCAD
Working with progeCAD
Command Reference
CAD System Variables
Programming progeCAD
Full Index (caution - 400kb)

Further Links:

Download progeCAD
Register progeCAD

Learning

T-FLEX PLM tutorial (PDF)
progeCAD IntelliCAD and AutoCAD training 
CATIA 2D 3D design tutorial
Alibre CAD/CAM basic tutorial

Resources

Educational CAD Software Solutions
Python scripting for DOS and Windows
Other free software downloads
CADDIT CAD CAM Forum Australia
__

Chamfering and filleting solids

You can chamfer or fillet a three-dimensional solid much like you chamfer or fillet a two-dimensional entity.

To chamfer a solid

  1. Do one of the following:
    • Choose Modify > Chamfer.
    • On the Modify toolbar, click the Chamfer tool ().
    • Type chamfer and then press Enter.
  2. Select the edge of the base surface to chamfer. (One of two surfaces adjacent to the selected edge will be highlighted.)
  3. Do one of the following:
    • To select a different surface, type n and press Enter.
    • To use the current surface, press Enter.
  4. Specify the base surface distance (measured from the selected edge to the base surface).
  5. Specify the adjacent surface distance (measured from the selected edge to the adjacent surface).
  6. Do one of the following:
    • Specify the edges to chamfer.
    • To select all edges around the base surface, type l and press Enter.

To fillet a solid

  1. Do one of the following:
    • Choose Modify > Fillet.
    • On the Modify toolbar, click the Fillet tool ().
    • Type fillet and then press Enter.
  2. Select the edge of the solid to fillet.
  3. Specify the fillet radius.
  4. Select additional edges to fillet, and press Enter to fillet.

CADDIT® is a registered trademark in Australia. All Rights Reserved. Comments concerning the content of this site should be addressed to our webmaster. progeCAD is a trademark of ProgeCAD srl. Autodesk® and AutoCAD® are both registered trademarks or trademarks of a third party, and used only for comparison purposes. All other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. Legal and Terms of Use. Google. Find us on Google+.