To chamfer two entities using the distance-angle method
- Do one of the following:
In the prompt box, choose Chamfer Settings.
In the Drawing Settings dialog box, click the Entity Modification tab.
Under Chamfer Distances And Angles, click Distance-Angle.
Under Chamfer Distances And Angles, specify the chamfer distance and angle.
Select the first entity.
Select the second entity.
- Choose Modify > Chamfer.
- On the Modify toolbar, click the Chamfer tool ().
- Type chamfer and then press Enter.
Select the first (A) and second (B) entities. The chamfer is drawn, based on the distance measured along the first entity (C) and the angle (D) formed with the first entity.