CADDIT CAD CAM CNC Software - download AutoCAD compatible design software progeCAD Alibre T-FLEX and more
CADDIT Website Knowledge Base Search:
CL

progeCAD Help

CR
Welcome to progeCAD
Working with progeCAD
Command Reference
CAD System Variables
Programming progeCAD
Full Index (caution - 400kb)

Further Links:

Download progeCAD
Register progeCAD

Learning

T-FLEX PLM tutorial (PDF)
progeCAD IntelliCAD and AutoCAD training 
CATIA 2D 3D design tutorial
Alibre CAD/CAM basic tutorial

Resources

Educational CAD Software Solutions
Python scripting for DOS and Windows
Other free software downloads
CADDIT CAD CAM Forum Australia
__

To draw a donut by specifying inside and outside diameters

 

  1. Specify the inside diameter of the donut.
  2. Specify the outside diameter of the donut.

Specify the first point of the inside diameter of the donut, or enter the diameter. If you specify a point, you are prompted to specify a second point. To draw a filled circle, enter 0 (zero) for the inside diameter.

Outside diameter of donut <value>: Specify the first point of the outside diameter of the donut, or enter the diameter. If you specify a point, you are prompted to specify a second point.

Center of donut: Enter the center point to place the donut. The prompt repeats, and you can continue to draw donuts until you choose Done or press Enter.

CADDIT® is a registered trademark in Australia. All Rights Reserved. Comments concerning the content of this site should be addressed to our webmaster. progeCAD is a trademark of ProgeCAD srl. Autodesk® and AutoCAD® are both registered trademarks or trademarks of a third party, and used only for comparison purposes. All other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. Legal and Terms of Use. Google. Find us on Google+.